Ground Loader

Elston Ground Loader

Elston Trailers produce a range of ground lowering trailers complete with an onboard battery pack and charger driving a 12 volt compressor. This battery pack can be hooked up to mains for overnight charge. Control of trailer ride height is by operating raise or lower button.

The more weight on the trailer the more pressure is required in the system (max 8 bar). We offer a single-axle 2.5m x 1.2m bed size trailer rated at 2,000kg with 1,000kg payload, or a 3.0m x 1.5m bed size trailer rated at 3,500kg with 2,400kg payload. Either trailer can be offered with a beaver tail base to remove the need for ramps. These trailers are ideal for the loading and unloading of a range of low ground clearance equipment such as large motorcycles, small forklifts, pallet trucks, scissor lifts, sack trucks, wheelie bins and stump grinders etc.

No ramps are required, so a smaller footprint can be used for loading and unloading and there is no need for full piece wind resistant ramps when towing, further increasing payload. This type of loading is also substantially safer as the trailer is lowered to the ground. Environmentally there is no oil from hydraulic hoses as the system is pneumatically operated.

To speak to our team for a quotation, or an initial consultation meeting to discuss your requirements, call today on (01942) 821446.